EMX Two Channel Multi-Voltage Vehicle Loop Detector EU Wiring | EMX-ULT-MVP-2E

EMX Two Channel Multi-Voltage Vehicle Loop Detector EU Wiring | EMX-ULT-MVP-2E

The ULTRALOOP® two-channel multi-voltage vehicle loop detector combines small
size with a 12VDC to 240VAC input range.

The ULT-MVP-2 provides relay contact outputs indicating vehicle presence, pulse, AB logic (directional mode), or the new EMX feature, Detect-On-Stop™ (DOS®) for each channel. The ULT-MVP-2 features automatic sensitivity boost (ASB) and infinite or normal (5 min.) presence.

The detector is easily installed and has user-friendly features that simplify set-up, operation, and troubleshooting. Sensitivity selection is simplified by the ULTRAMETER™ display that indicates the appropriate sensitivity setting with the vehicle positioned on the loop. The 10 sensitivity settings allow for finer adjustment of the detection level, while the 4 frequency selections provide greater flexibility in preventing crosstalk in multi-loop applications.

Features

• Presence/pulse output
  
• AB logic
  
• Detect-On-Stop
  
• ABS
  
• Normal/infinite presence

Connections

• Power: 1 
• Power: 2
• Channel 1 loop: 3
• Channel 1 loop: 4
• Channel 2 loop: 5
• Channel 2 loop: 6
• Channel 2 NO contact: 7
• Channel 2 common contact: 8
• Ground: 9
• Channel 1 NO contact: 10
• Channel 1 common contact: 11

Manufacturer's Warranty

• 2 Years

Technical Specifications

• Sensitivity: 10 levels, 0-9
• ULTRAMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
• Loop Frequency: 4 settings (low, med-low, med-hi, high)
• Loop Inductance: 20…2000µH (Q factor > 5)
• Grounded Loop: Isolation transformer allows operation with poor quality loops
• Automatic Tuning: Detector tunes to loop on power-up and following frequency count function
• Environmental Tracking: Automatic compensation
• Surge Protection: Loop circuitry protected by surge suppressors
• Presence Relay: Loop circuitry protected by surge suppressors
• Output B Relay: SPST relay contact (form A)
• Contact Ratings: 1A @ 24VDC…120VAC
• Power / Loop Fault Indicator: Green LED
• Detect / Frequency Count Indicator: Red LED
• Detect-On-Stop™: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
• ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
• Power: 12VDC…24VDC, 24VAC
• Operating Current: 15mA standby / 45mA detect
• Operating Temperature: -40˚C…82˚C (-40˚F…180˚F) 0…95% relative humidity
• Dimensions (L x W x H): 73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
• Weight: 0.25 lbs. (113 g)
• Housing: ABS plastic, IP30
• Connections: Socket mount - 11-pin male (JEDEC B11-88)

Videos

Product Literature

• EMX ULTRA-MVP-2 Spec Sheet
• EMX ULTR-MVP-2 Manual